----------

Shielded Silver Clad Copper Conductor Interconnect Cables

Shielded Silver Clad Copper Conductor Interconnect Cables
Bob's Devices Silver Clad Copper Interconnect Cables Bob's Devices Silver Clad Copper Interconnect Cables Bob's Devices Silver Clad Copper Interconnect Cables
Details
SKU SKU176251
Weight 2.00 lbs
 
Our price: $395.00
Options
Connector
Please Select Desired Length
Quantity

Bob's Devices continues to break the price barrier by offering top quality audiophile cables at 1/3 the price of competitive products.  All our cables are hand crafted, fully balanced, individually tested and terminated with top of the line Cardas Audio SRCA or the new Cardas XLR connectors. For those of you who prefer RCA locking connectors, we offer the Vampire LRCA-8 Locking connectors with spring loaded center pin.. The interior connections are resistance soldered and dampened in pure Teflon wrap.

As always, we back our cables with our 100% customer satisfaction guarantee.  All Bob's interconnects feature a balanced type of architecture with internal conductors carrying the + and - signal with an additional braided conductive shield that is connected on one end only.  This provides shielding effectively rejecting RF and EM interference without creating ground loops (say goodbye to hum). 

A special order item is a Solid Silver custom terminated interconnect which is Bob's top-of-the-line cable.  It features a pair of pure silver 22 awg conductors and triple-shielding consisting of a silver plated OFC braided shield coupled to an Aluminum/Mylar shield and a Teflon PTFE shield.  Covering the shield is a braided nylon sheath encased in a clear PVC outer jacket.  Internally, this cable has 5 polyethylene air tubes separating and isolating the conductors.

Bob's silver cable is custom terminated in our lab with your choice of the best Cardas SRCA or the new Cardas XLR connectors.

Bob's custom terminated silver-clad crystal copper interconnects feature a balanced design architecture using Polyethylene insulation and a pair of silver plated copper conductors (SP-OFC) that are insulated with Foamed Polyethylene, and wrapped together by a double screen shielding consisting of a tinned OFC braided shield coupled to an Aluminum/Mylar shield.  This wire architecture is modeled from the wire Koetsu uses to wrap their Platinum magnets. We believe the results will thrill you with exhilarating highs, tight bass, and romantic mids - very much the Koetsu paradigm.  These interconnects not only shine with tube equipment but do especially well with a solid-state phono stage and preamp.

The silver clad copper wire uses the UP-OCCP (Ultra Pure - Ohno Continuous Casting Process) which is a continuous-casting method that was developed by Professor Ohno of the Chiba Institute in Japan.  This wire is free from impurities (up to 99.99998% pure copper and silver). Accordingly, it is able to transmit electrical signals faster, and with less distortion than ordinary OFC and silver wires.

Bob silver-clad copper interconnects are custom terminated in our lab using the very best Cardas SRCA or the new Cardas XLR connectors. Vampire LC-8 locking connectors are also available.

Bob's custom terminated silver-clad crystal copper interconnects feature a balanced design architecture using Polyethylene insulation and a pair of silver plated copper conductors (SP-OFC) that are insulated with Foamed Polyethylene, and wrapped together by a double screen shielding consisting of a tinned OFC braided shield coupled to an Aluminum/Mylar shield.  This wire architecture is modeled from the wire Koetsu uses to wrap their Platinum magnets. We believe the results will thrill you with exhilarating highs, tight bass, and romantic mids - very much the Koetsu paradigm.  These interconnects not only shine with tube equipment but do especially well with a solid-state phono stage and preamp.

The silver clad copper wire uses the UP-OCCP (Ultra Pure - Ohno Continuous Casting Process) which is a continuous-casting method that was developed by Professor Ohno of the Chiba Institute in Japan.  This wire is free from impurities (up to 99.99998% pure copper and silver). Accordingly, it is able to transmit electrical signals faster, and with less distortion than ordinary OFC and silver wires.

Bob silver-clad copper interconnects are custom terminated in our lab using the very best Cardas SRCA or the new Cardas XLR connectors. Vampire LC-8 locking connectors are also available.

Price is for a pair of cables,  Red and Black color coded ends for left and right channels.

: *
: *
: *
 
Crosscheck Level
Anti-Skate Device for JMW 10
VPI Industries JMW 10 tonearm
Crosscheck Level Anti-Skate Device for JMW 10 VPI Industries JMW 10 tonearm
$10.00
$100.00
$1000.00
 
JMW Metal Precision Alignment Jig
Avenger Motor & Housing
Charisma MC-2 Moving Coil Cartridge
JMW Metal Precision Alignment Jig Avenger Motor & Housing Charisma MC-2 Moving Coil Cartridge
$60.00
$1000.00
$1650.00

Customer Reviews

There have been no reviews for this product.

Add your review here

: *
: *
Type the characters you see in the picture:


*